Polymethyl Methacrylate (PMMA) Acrylic Sheet Scrap Regrind

Polymethyl Methacrylate (PMMA) Acrylic Sheet Scrap Regrind PMMA polymer exhibits glass-like qualities – clarity, brilliance, transparency, translucence – at half the weight with up to 10 times the impact resistance. It is more robust and have less risk of damage. Let’s discuss PMMA properties & benefits in detail:

Polymethyl Methacrylate (PMMA) Acrylic Sheet Scrap Regrind

Polymethyl Methacrylate polymer exhibits glass-like qualities – clarity, brilliance, transparency, translucence – at half the weight with up to 10 times the impact resistance. It is more robust and have less risk of damage. Let’s discuss PMMA properties & benefits in detail:

Transmittance – PMMA (Acrylic) polymer has a Refractive Index of 1.49 and hence offers high light transmittance. PMMA grades allow 92% of light to pass through it, which is more than glass or other plastics. These plastic materials can easily be thermoformed without any loss in optical clarity. As compared to polystyrene and polyethylene, PMMA is recommended for most outdoor application thanks to its environmental stability.

PMMA Processing Conditions

PMMA is suitable for processing by injection molding, extrusion, extrusion blow molding (impact modified acrylics only), thermoforming and casting.

Pre-drying is not necessary if a vented cylinder is used but if a normal cylinder is used then PMMA must be processed dry and it is advisable to pre-dry the granules for up to 8 hours at 70-100°C. Surface defects and blisters will form if damp granules are processed.

Injection Molding

  • Melt temperature : 200-250°C
  • Mold temperature : 40-80°C
  •  High injection pressures are needed because of poor flow properties and it may be necessary to inject slowly to get the correct flow

· Internal stresses can be eliminated by heating at 80°C

Extrusion

· Extrusion temperature : 180-250°C

· A degassing screw with an L/D ratio of 20-30 is recommended

Buy Now On Prontoways Granules

SPECIFICATIONS:

Materials Polymethyl Methacrylate (PMMA)
Color Natural and Mix Color
Application glass roofing, façade design, advertising, automotive headlamps,…
Grade optical grade and general purpose grade.
Type Post Industrial Waste
Quality Clean and less than 1% shortage
Form Regrind

Reviews

There are no reviews yet.

Be the first to review “Polymethyl Methacrylate (PMMA) Acrylic Sheet Scrap Regrind”

Your email address will not be published.